Bonsai Carving & Grafting Tools

The Bonsai Cut Paste is a thick, clay-based Bonsai sealant, used to seal cuts and keep sap from bleeding. Cut Paste is used by kneading it into a ball, then flattening between fingers before applying to bonsai wound. The purpose of the bonsai paste is to...

Bonsai brushes are used to clean and brighten the bark on bonsai trees. Lightly brush the trunk to remove any dirt as well as older bark. Bonsai Brush with nylon bristles and stainless steel handle measures 9 inches in length. Made in Japan.

This tool helps you easily and safely strip the bark and cambium off of your branches to expose the wood when working with Jins. Small triangle shape enables you reach fine edges between branches for more detailed carving.Features a comfortable wooden...

This tool helps you easily and safely strip the bark and cambium off of your branches to expose the wood when working with Jins. Small circle shape enables you to reach inner corners and edges between branches. Features a comfortable wooden handle that...

Jin Pliers are great for use with bonsai wire either for applying or removing wire from trunks and branches. Jin pliers can also be used to create an aging or deadwood effect on a bonsai tree by stripping the bark of the tree to create a Jin or Shari...

This tool helps you easily and safely strip the bark and cambium off of your branches to expose the wood when working with Jins. Small triangle shape enables you reach fine edges between branches for more detailed carving. Scoop end allows for fine...

The Bonsai Cut Paste is a thick, clay-based Bonsai sealant, used to seal cuts and keep sap from bleeding. Cut Paste is used by kneading it into a ball, then flattening between fingers before applying to bonsai wound. The purpose of the bonsai paste is to...

This jin shari carving tool set includes 3 jin scrapers/chisels of varying shapes for all your jin carving needs. These tools are made for carving and stripping bark to create jins, sharis, and deadwood. Easily and safely strip bark and cambium off your...

This tool helps you easily and safely strip the bark and cambium off of your branches to expose the wood when working with Jins. Large circle shape enables you remove larger amounts of bark.Features a comfortable wooden handle that won't slip easily. ...

The Bonsai Cut Past is a thick, clay-based Bonsai sealant, used to seal cuts and keep sap from bleeding. Cut paste is used by kneading into a ball, then flattening between fingers before applying to bonsai wound. The purpose of the bonsai paste is to...

Sealant helps ensure healthy growth after a large pruning cut. Apply this wound sealant to branches that have been damaged or cut in order to prevent disease and infection. Arrives in a 100 gram tube. Made in Japan.

This tool helps you easily and safely strip the bark and cambium off of your branches to expose the wood when working with Jins. Very large triangle shapes makes it easy to remove large amounts of bark on with the least amount of effort. Features a...

Our popular Bonsai Cut Paste, now in liquid form. The Bonsai Cut Paste is a clay-based Bonsai sealant, used to seal cuts and keep sap from bleeding. The purpose of the bonsai paste is to control how the scar tissue forms and looks after healing. It is...

This cut paste is a very popular paste used in Japan for sealing up large cuts and wounds made into the trunk or bark. This will prevent air, water, and moisture from gathering around the wound and causing further damage to the trunk around it. Paste...

This tool helps you easily and safely strip the bark and cambium off of your branches to expose the wood when working with Jins. Thin, wire shaped ends enable you reach fine edges between branches for more detailed carving. Features a comfortable wooden...

The hooked shape of this carving tool makes it easy to pull away and carve deadwood grooves, scrape away wood, and remove unwanted sections on branches and trunks. Tool measures approximately 7.5 inches. Durable stainless steel construction. Made in...

This cut paste is a very popular paste used in Japan for sealing up large cuts and wounds made into the trunk or bark. This will prevent air, water, and moisture from gathering around the wound and causing further damage to the trunk around it. Paste...

This graving tool is designed to give you more angles when carving the wood on your bonsai trees. The unique style blade makes it easy to make scrape away wood and remove unwanted sections on your branches and trunk when branches limit your movement...

This carving knife is designed to give you more angles when carving the wood on your bonsai trees. The shorter hooked blade makes it easy to make precise cuts on your branches and trunk when branches limit your movement. Made of carbon steel. Tool...

Jin Pliers are great tools for wiring and working with deadwood. Jin pliers can be used to help create Jins on your branches by peeling back the cambium off of the desired branch. Jin pliers can also be used to hold on to thicker wire to add additional...

This hemp broom makes clean up easy for your bonsai. Use it to clear dead leaves or smooth out the topsoil. Features fine bristles. Broom measures approximately 4.8 inches (120 mm). Made in Japan.

The grafting knife has multiple uses depending on the type of grafting you're planning on doing. Use the grafting knife for scion grafting or helping to remove bark when air layering. Knife measures 7.5 inches with sheath. Leather-wrapped handle. Right...

The thin blade of this bonsai keyhole saw lets you slip through branches easily. Saw toothed blade makes cutting branches effortless. Specifically for use with bonsai. Wooden handle with stainless steel blade. Overall length of keyhole saw is...

Bonsai brushes are used to clean and brighten the bark on bonsai trees. Lightly brush the trunk to remove any dirt as well as older bark. Bonsai Brush with nylon bristles and stainless steel handle measures 11.5 inches in length. Made in Japan.

This hook carving kit includes 5 carbon steel tools of various sizes for different cuts and shapes. The hook shape makes it easy to pull away and carve deadwood grooves. Tools measure 7.5" in length. Made in China.

This paste is very popular for use on Azaleas and deciduous trees. Apply the orange paste to fresh cuts, small and large, to seal the wound and protect from damage. The paste is made with a fungicide to protect it while it heals. A must have for...

This carving tool is designed to give you more angles when carving the wood on your bonsai trees. The shorter blade makes it easy to make precise cuts on your branches and trunk when branches limit your movement. The knife can also be used for grafting...

Woodworking chisel for carving and splitting deadwood for jins. This specialized bonsai chisel has a broad, curved tip used to carve jins and sharis. Made of strong carbon steel, the curved edge is sharp and durable. Sharp blade is...

Woodworking chisel for carving and splitting deadwood for jins. This specialized bonsai chisel has a curved, spear-shaped tip used to carve jins and sharis. Made of strong carbon steel, the double edge is sharp and durable. Sharp blade is ideal for both...

Set of 5 woodworking chisels for carving shari and jins. Blades are white steel laminated to soft steel. Made in Japan.Set includes:- 7.5mm flat round- 3mm u-gouge- 6mm u-gouge- 6mm v-gouge- 7.5mm skew right- Plastic chisel case

Grafting knife arrives with wooden handle and sheath. The grafting knife has multiple uses depending on the type of grafting you're planning on doing. Use the grafting knife for scion grafting or helping to remove bark when air layering. Knife...

This carving tool set includes six carbon steel burin style tools made for carving your trunk and deadwood. Burin tools can be used to create grooves for styling the wood on your bonsai. Tools measure 6" in length. Made in China.

These carving burrs are perfect for power carving on your bonsai deadwood features. Burrs can be used with appropriately sized rotary tool such as dremels or die grinders. Authorized dealer of Saburrtooth products.Kit includes the following tools:1/4"...

These carving burrs are perfect for power carving on your bonsai deadwood features. Burrs can be used with appropriately sized rotary tool such as dremels or die grinders. Authorized dealer of Saburrtooth products.Kit includes the following tools:1/4"...

These carving burrs are perfect for power carving on your bonsai deadwood features. Burrs can be used with appropriately sized rotary tool such as dremels or die grinders. Authorized dealer of Saburrtooth products.Shank: 1/4"Shape: TaperDiameter:...

These carving burrs are perfect for power carving on your bonsai deadwood features. Burrs can be used with appropriately sized rotary tool such as dremels or die grinders. Authorized dealer of Saburrtooth products.Shank: 1/4"Shape: TaperDiameter:...

Wooden woodworking mallet for carving and splitting deadwood for jins. Mallet measures 11 3/4"L with 75mm (3") diameter head. Handmade from Japanese White Oak. Made in Japan.

Woodworking chisel for carving and splitting deadwood for jins. Chisels are machine finished, made of white steel laminated to soft iron, with a red oak handle. Chisel measures 8.6"L. Made in Japan.

Woodworking chisel with rounded head for carving and splitting deadwood for jins. Wide, wooden handle is a comfortable grip. Flat end of tool is designed for use with wooden mallet. Carbon steel and wood construction. Chisel measures 8"L. Made in Japan.

Woodworking chisel with rounded head for carving and splitting deadwood for jins. Wide, wooden handle is a comfortable grip. Flat end of tool is designed for use with wooden mallet. Carbon steel and wood construction. Chisel measures 8"L. Made in Japan.